Yorkie-Pro handheld wireless intrusion detection system

Yorkie-Pro™ wireless intrusion detection system (WIDS) is a handheld receiver designed for wireless security audits of data-sensitive government, law enforcement and military facilities. Yorke-Pro sweeps all nearby Cellular, Wi-Fi, Bluetooth and BLE (Bluetooth Low Energy) channels using a high-speed receiver engine in conjunction with a Wi-Fi/BT/BLE demodulator.

All-in-one handheld WIDS locates suspicious Cellular, Wi-Fi and BT/BLE devices;

Thresholds, frequency analysis and whitelisting for advanced wireless security audits and TSCM;

Direction finding for all wireless detection;

Full data logging and data snapshots for later analysis;

Full CW detection combined with dual band demodulation for comprehensive wireless surveys;

Multi-band measurements allowing profiling of all cellular detection;

Frequency and time domain RF measurements for both on-the-go and fixed monitoring surveys;

Designed and manufactured entirely in the USA;

CW Receiver

• Yorkie-Pro’s passive receiver covertly ensures all RF is detected, even RF interference and rogue devices invisible to the network. This means that all cellular RF (texts, voice and data) are detected – even RF pings to/from a cell phone in standby mode. This also means that Yorkie-Pro’s cellular receiver can locate contraband phones, unauthorized bluetooth devices, rogue Wi-Fi APs and more using a specially designed direction finding antenna system.

Demodulating Receiver

• Yorkie-Pro contains a dual-band demodulating receiver for connection to any known bluetooth, BLE or Wi-Fi access point. Yorkie-Pro not only tracks and locates their whereabouts, but also provides detailed identifiers and security information for each device. Yorkie-Pro generates whitelists of known devices. This allows security personnel to easily focus on true wireless threats.
• Yorkie-Pro’s light weight, sleek profile and color touchscreen make it ideal for wireless security audits requiring a NO WIRELESS policy in any facility. Small enough to fit into most pockets for vibrating alerts, Yorkie-Pro can also handle desktop duty as an all day wireless activity monitor. Go handheld with Yorkie-Pro to sniff out all active cell phones use up to 150 feet away indoors and then swap the omni antenna for a direction finding antenna allowing outdoors ranges up to 1 mile away.

Properties

• Countries/Regions Supported: U.S., Canada, EU, Australia, New Zealand, Israel, Sweden, Brazil, Japan, China, Chile, India, South Korea;

FREQUENCY RANGE 650 MHz to 3 GHz and 4.9 – 5.9 GHz (covers all cellular devices, Wi-Fi  and Bluetooth and BLE);

CW DETECTION: All U.S. and International Cellular Bands;  Wi-Fi 2401-2495 MHz   and   5180-5825 MHz; Bluetooth & BLE 2402-2480 MHz

DEMODULATION: 2.4 GHz Wi-Fi Channels: 1,2,3,4,5,6,7,8,9,10,11;

(DUAL-BAND): 5 GHz Wi-Fi Channels: 36,40,44,48,52,56,60,64,100,104,108,112,116,120,124,128,132,136,140,149,153,157,161,165; Bluetooth Channels: 1-79;

Bluetooth Low Energy Channels: 1-40;

ADDITIONAL DETECTION: BSSID, SSID, Device ID, WPA, WPA2, MAC, Channel/Band #

DYNAMIC RANGE:  70 dB;

SENSITIVITY: -90 dBm;

BANDWIDTH RESOLUTION: 4 MHz, 20 MHz;

SELECTIVITY REJECTION: Better than 40 dB;

RECEIVING MODES: High-speed active scanning;

ANTENNAS SUPPORTED: (3) Removable omni-directional SMA antennae (2) Removable DF (Direction Finding) antennae (one for cellular and one for Wi-Fi and BT);

POWER REQUIREMENTS: Internal built-in 5.0 Ah Li-Ion battery / external 12 VDC nominal;

CHARGING: 3 hours (from ~50% capacity);

BATTERY RUNTIME: 5-6 hours (typical use);

DISPLAY & CONTROL: 270 x 480 sunlight readable color TFT with a resistive touch screen;

ALERTS: Vibration (toggleable) and visible (blue LED on top of unit);

Set of equipment

• Yorkie-Pro handheld wireless intrusion detection system;
• (3) Omni-directional SMA antennae;
• 12 VDC power adapter;
• Charging dock;
• Carrying case;
• Instructions for use in Lithuanian and English; 

Warranty: 12 months;

Free delivery: within 20 business days throughout Lithuania.